君はまだCCNP資格300-135試験参考書を通じての大きい難度が悩んでいますか? 君はまだCCNP資格300-135試験参考書に合格するために寝食を忘れて頑張って復習しますか? 早くてCCNP資格Troubleshooting and Maintaining Cisco IP Networks試験参考書を通りたいですか?Killtestを選択しましょう!KilltestはきみのIT夢に向かって力になりますよ。現在の仕事に満足していますか。自分がやっていることに満足していますか。自分のレベルを高めたいですか。では、仕事に役に立つスキルをもっと身に付けましょう。もちろん、IT業界で働いているあなたはIT認定試験を受けて資格を取得することは一番良い選択です。それはより良く自分自身を向上させることができますから。 Share some CCNP 300-135 exam questions and answers below. Ticket 4 NATACL
TROUBLE TICKET STATEMENT:
The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server). show run by yourself to obtain the following information: Configuration on R1 ip nat inside source list nat_pool interface Serial0/0/0/1 overload ! ip access-list standard nat_pool permit 10.1.0.0 ! interface Serial0/0/0/1 ip address 209.65.200.224 255.255.255.252 ip nat outside ! interfaceSerial0/0/0/0.12 ip address 10.1.1.1 255.255.255.252 ip nat inside ip ospf message-digest-key 1 md5 TSHOOT ip ospd authentication message-digest
On Which device is the fault condition located? A. R1 B. R2 C. R3 D. R4 E. DSW1 F. DSW2 G. ASW1 Answer: A
What is the solution to the fault condition? A. Under the interface Tunnel34 configuration delete the tunnel mode ipv6 command. B. Under the interface Serial0/0/0.34 configuration enter the ipv6 address 2026::34:1/122 command. C. Under the interface Tunnel34 configuration enter the ip address unnumbered Serial0/0/0.34 command. D. Under the interface Tunnel34 configuration delete the tunnel source Serial0/0/0.34 command and enter the tunnel source 2026::34:1/122 command. Answer: A
The fault condition is related to which technology? A. NTP B. IP DHCP Server C. IPv4 OSPF Routing D. IPv4 EIGRP Routing E. IPv4 Route Redistribution F. IPv6 RIP Routing G. IPv6 OSPF Routing H. IPV4 and IPV6 Interoperability I. IPv4 layer 3 security Answer: G
How to check MTU of interface using ping? / How can you check the links mtu size with ping command? A. ping 10.1.1.1 size 1501 B. ping 10.1.1.1 size 1500 df-bit C. ping 10.1.1.1 D. ping 10.1.1.1 no-size Answer: B
The Fault Condition is related to which technology? A. BGP B. NAT C. IP NAT D. IPv4 OSPF Routing E. IPv4 OSPF Redistribution F. IPv6 OSPF Routing G. IPv4 layer 3 security Answer: C
Ticket 5 R1ACL
TROUBLE TICKET STATEMENT: The implementation group has been using thetest bed to do a ¡®proof-of-concept¡¯that required both client 1 and client 2 to access the Web Server at 209.65.200.241.After several changed to interface status, network addressing, routing schemes and layer 2 connectivity, at trouble ticket has been opened indicating that client 1 cannot ping the 209.65.200.241 (internet Server). show run by yourself to obtain the following information: Client 1 is not able to reach the WebServer at 209.65.200.241. Initial troubleshooting shows that R1 is also not able to reach the WebServer. R1 also does not have any active BGP neighbor. Configuration on R1 ! interface Serial0/0/0/1 description link to ISP ip address 209.65.200.224 255.255.255.252 ip access-group edge_security in ip nat outside ip virtual-reassembly ntp brasdcast client net broadcast key 1 no cdp enable !! ip access-list nat_traffic permit 10.1.0.0 0.0.255.255 ip access-list nat_traffic permit 10.2.0.0 0.0.255.255 ! ip access-list edge_security deny ip 10.0.0.0 0.255.255.255 any ip access-list edge_security deny ip 172.16.0.0 0.15.255.255 any ip access-list edge_security deny ip 192.168.0.0 0.0.255.255 any ip access-list edge_security deny ip 127.0.0.0 0.255.255.255 any ip access-list edge_security permit ip host 209.65.200.241 any
On which device is the fault condition located? A. R1 B. R2 C. R3 D. R4 E. DSW1 F. DSW2 G. ASW1 Answer: A
What is the solution of the fault condition? A. Under the ip access-list edge_security configuration add the permit ip 209.65.200.224 0.0.0.3 any command B. Under the interface Serial0/0/1 enter the ip access-group edge_security out command. C. Under the ip access-list edge_security configuration delete the deny ip 10.0.0.0 0.255.255.255 any command D. Under the interface Serial0/0/0 configuration delete the ip access-group edge_security in command and enter the ip access group edge_security out command Answer: A
The Fault Condition is related to which technology? A. BGP B. NAT C. IP NAT D. IPv4 OSPF Routing E. IPv4 OSPF Redistribution F. IPv6 OSPF Routing G. IPv4 layer 3 security Answer: G
多くの人々はIT認定試験を受験して認証資格を取ることを通して彼らの強さを証明します。あなたもIT認証資格を取りたいですか。まずCCNP資格の300-135試験に合格しましょう。これはCCNP資格の最も重要な試験の一つで、業界全体に認証された資格です。あなたにとても良い指導を確保できて、Troubleshooting and Maintaining Cisco IP Networks試験に合格するのを助けって、Killtestからすぐにあなたの通行証をとります。Killtestは98%の合格率を保証するだけでなく、1年間の無料なオンラインの更新を提供しております。最新の資源と最新の動態が第一時間にお客様に知らせいたします。
IT認定試験は現在の社会で、特にIT業界で最も人気のある試験だと考えられています。IT認定資格は国際社会で広く認可されています。昇進したく、昇給したく、あるいは単に自分の仕事スキルを向上させたいなら、IT認定試験を受験して資格を取得するのはあなたの最もよい選択です。どうですか。あなたもきっとそう思うでしょう。ですから、躊躇しないではやく試験を申し込みましょう。CCNP資格の300-135試験問題集は最近最も人気のある試験ですから、受験したいのですか。従って、すぐに自分の弱点や欠点を識別することができ、正しく次CiscoのTroubleshooting and Maintaining Cisco IP Networks試験問題集学習内容を手配することもできます。